How to turn off the moisture detected notification on your Samsung

Samsung’s A-series, S-series, and Note-series devices have several safety measures, like IP68 water and dust resistance, to protect your device from damage and corrosion. These Samsung Galaxy phones have moisture detection sensors to shield the device from short-circuiting. You can’t charge your Samsung phone until the system clears the notification. Many have complained about receiving the error even after drying out their phone. Before we go over the troubleshooting tips to clear the Moisture Detected error, let’s have a quick word about it.

Why you see a Moisture Detected warning on your Samsung phone

IP68-certified Samsung phones have a moisture detection sensor near the charging port. When your phone’s charging port is exposed to moisture, water, or another liquid, the system displays an Unplug charger immediately warning and stops charging.

Some common scenarios include spilling a drink on your phone and using it during heavy rain, showers, or in humid environments like saunas. It’s a neat One UI feature that protects your primary device from permanent water damage.

What does your Samsung phone do to protect itself?

When your Samsung phone’s charging port is exposed to liquid, the system does several things to play it safe. If your phone is powered on, you see a Warning: Unplug charger immediately notification.

If your phone has run out of battery, you only notice a water droplet icon on the screen. In any case, the system turns off charging via the USB port.

Tips to follow if your Samsung phone gets wet

Before you go over the tips below, make sure to follow some basics first. If your Samsung phone is exposed to water or moisture, try the tricks below to clear a Moisture Detected error.

• Remove the case and any accessories, pick up a clean microfiber cloth, and wipe it.
• Use a soft, dry cotton swab or a toothbrush to remove debris and moisture.
• Gently shake the device with the charging port facing downward to remove moisture. However, be careful, as excessive force may cause damage to your Samsung phone.
• Dry your phone with a fan. If you have a hair dryer, blow hot air at a slow speed to dry out the charging port quickly.

If you live in a hot environment, dirt jamming the USB port on your Samsung phone can cause charging issues.

Clear the Moisture Detected alert on your Samsung phone

In most cases, the tricks above should dismiss the Moisture Detected error on your Samsung device. If the error message didn’t go away, try the tricks below.

Restart the phone

A simple system reboot can fix temporary glitches on your Samsung phone. Connect your Samsung phone to a charger, and swipe down from the home screen to open the notification center. Swipe down again to expand quick toggles. Now, tap the power icon at the top and select Restart.

Try a different charging cable

Your USB cable might be the culprit here. If your USB cable is exposed to water or moisture, the system may display a Moisture Detected notification when you connect it to the USB slot. Swap to another cable and see if it resolves the issue.

Use another charging location

Do you charge your Samsung phone in high-condensation areas like bathrooms or kitchens? It may trick the moisture sensor on your Samsung phone and display an error. Move to a drier room and charge your phone again.

Disable fast charging

When you turn off fast charging on your Samsung phone, the system limits charging to a certain voltage. The trick has worked for many, and it’s worth trying on your phone. Here’s what you’ll do:

1. Open Settings on your Samsung phone.
2. Scroll to Battery and device care.
3. Select Battery.

   

   

4. Tap More battery settings.
5. Turn off the Fast charging toggle.

   

   

When your Samsung phone starts charging normally, you can activate Fast charging from Settings to enjoy fast charging.

Clear USB cache

Samsung recommends clearing the USB cache to clear the Moisture Detected notification on Galaxy devices. Go through the steps below to make changes.

1. Launch One UI Settings and go to the Apps menu.
2. Tap the filter icon and switch on the Show system apps toggle.
3. Search for USB using the top menu.
4. Select USBSettings.

   

   

5. Tap Storage and select Clear cache.

   

   

Force stop Android system

Force-stopping the Android system is one of the last options to clear the Moisture Detected notification on your Samsung phone. The trick closes all the background apps, and you may face instability for a while.

1. Open Settings and scroll to Apps.
2. Tap the filter icon and turn on the Show system apps toggle.

   

   

3. Select Android System and tap Force stop from the following menu.

   

   

Use wireless charging

If your Samsung phone supports wireless charging, you can temporarily use a wireless charger to juice up your device. It’s a handy trick if your Samsung phone runs out of battery and only shows a water drop icon.

Place your Samsung phone in the center of the pad to avoid interruptions.

Update One UI

The Moisture Detected notification may appear due to a software glitch on your phone. Samsung frequently releases system updates to add new features and fix bugs. Follow the steps below to update One UI to the latest version.

1. Open Settings and scroll to Software update.
2. Select Download and install.

   

   

3. Install the latest One UI update and check if the notification goes away.

Juice up your Samsung phone as usual

Unnecessary Moisture Detected alerts on your Samsung phone can spoil your mood. You can always switch to wireless charging, but it isn’t a permanent solution. Before you try an unorthodox method or rush to the nearest Samsung service center, use the tricks above to get rid of such stubborn alerts in minutes.

If you recently switched from a Google Pixel or iPhone to a Samsung phone, the One UI Android skin may feel overwhelming at first glance. You can check our separate guide on One UI Home to learn more.